Return to Website
RRR Forum

Welcome to our forum. Feel free to post a message.

All posts will be vetted and inappropriate ones WILL be deleted and the user barred from the service.

Views expressed within this forum are those of individuals and not nessarily of the Range Rover Register.

The Range Rover Register and the Moderators accept no liability for any fixes, repairs or referals mentioned by forum users.


Return to Website

  First
  Prev
  Reply
  Forum
Next  
Last  
Search this Forum:  
Viewing Page 1 of 1 (Total Posts: 9)


Author Comment    
AndyM

am1nik1@aol.com

IP: 172.201.192.88

May 5, 08 - 6:49 PM
93 classic vogue gearbox noise

Hi all,
The gearbox has developed a clanking noise at idle if you raise the revs even just to around 900rpm it stops. Anybody have an idea what it could be.
Regds
AndyM
paintman


IP: 195.93.21.35

May 5th, 2008 - 7:51 PM
Re: 93 classic vogue gearbox noise

If average mileage or above for the year most likely worn drive chain (BW box is chain drive)Often manifests as a banging under acceleration which is the chain jumping over the sprockets.
Have a word with www.ashcroft-transmissions.co.uk
AndyM


IP: 172.201.192.88

May 5th, 2008 - 10:45 PM
Re: 93 classic vogue gearbox noise

Thanks for the reply. Ashcroft replaced the transfer box and viscous coupling a few years ago the noise is coming from the front of the gearbox. I may need to pay them a visit to replace the gearbox just wondered if a less expensive solution could be found.I also have moved to Dorset now a good 100 mile from them in Luton.
Regds
AndyM
Mike


IP: 213.40.216.130

May 7th, 2008 - 9:13 AM
Re: 93 classic vogue gearbox noise

Is it an auto, if so, most likely flex plate, get it fixed pronto because it will break the oil pump drive if you keep using it. I have a number of them if you get stuck for one.
AndyM


IP: 172.201.192.88

May 7th, 2008 - 10:30 AM
Re: 93 classic vogue gearbox noise

Hi Mike,
Thank's for the info. Is it a hard job to change the flex plate,will i need a ramp or can it be done lying under the Range Rover?.
Regds
AndyM
paintman


IP: 195.93.21.35

May 8th, 2008 - 10:01 PM
Re: 93 classic vogue gearbox noise

You have to either remove the gearbox or the engine.
The flex plate is a circular disc connected in the centre to the crankshaft and at the outer edge by 4 bolts to the Torque Converter.
Can I suggest you give Ashcroft a ring as you have dealt with them before & ask their advice.
AndyM


IP: 172.201.192.88

May 8th, 2008 - 10:23 PM
Re: 93 classic vogue gearbox noise

Hi Paintman,
I think your right it sounds a nasty job. When next visiting the inlaws i will get Ashcroft to work there magic on it. Cheers for the info.
Regds
AndyM
AndyM


IP: 92.20.98.203

May 15th, 2008 - 10:32 PM
Re: 93 classic vogue gearbox noise

Update,
Had the gearbox taken out and checked at the local garage that does LandRovers as he said it was the flex plate aswell. The flex plate was perfect so they are getting a gearbox specialist they use for those jobs to check. Anyone with any ideas as to what it could be?
Regards
AndyM
paintman


IP: 195.93.21.35

May 17th, 2008 - 12:01 AM
Re: 93 classic vogue gearbox noise

And Ashcroft - transmission specialists - told you what?


  First
  Prev
  Reply
  Forum
Next  
Last