Return to Website
RRR Forum

Welcome to our forum. Feel free to post a message.

All posts will be vetted and inappropriate ones WILL be deleted and the user barred from the service.

Views expressed within this forum are those of individuals and not nessarily of the Range Rover Register.

The Range Rover Register and the Moderators accept no liability for any fixes, repairs or referals mentioned by forum users.


Return to Website

  First
  Prev
  Reply
  Forum
Next  
Last  
Search this Forum:  
Viewing Page 1 of 1 (Total Posts: 3)


Author Comment    
mark

marksimcoe@aol.com

IP: 195.93.21.35

Jan 17, 08 - 9:10 PM
very bad front brake judder p38

hello folks hope u all had a good new year .
back to the p38 i got mine chip the other day on that slow 2.5 bmw lump .. wot a better 4x4 to drive now .
got it of ebay £225.00 all in with lifetime . 30 mins to fit ,,
but less about that when braking over the last couple of days when doing the pedal heavy at lights or a juntion in feels like i am going over a pebel road and the wheel is all over the place . no noisy sounds
and does not do it when slow braking is done .. any help we be great thanks ,last year had front discs/pads and steering ball link . reg,s mark hamps
1993 lse / 1995 rr dt / 1885/ off roader ,,
jeremy


IP: 195.93.21.35

Jan 18th, 2008 - 5:21 PM
Re: very bad front brake judder p38

Check steering damper.
More likely that the discs are warped. Had exactly the same problem with girlfriends 4.6. Apparently the run-out needs to be checked on them at fitting.
Good idea to check the calliper pistons are not sticking aswell.....that can mean overheated brakes,knackered bearing and fried abs sensor.This was on the rear axle and so everything was changed both sides of course(double the cost)!!!!!
mark


IP: 195.93.21.35

Feb 15th, 2008 - 8:50 AM
Re: very bad front brake judder p38

new steering damper .. all gone
and drives a1 ..
reg,s mark


  First
  Prev
  Reply
  Forum
Next  
Last